Skip links

Alkyd Primer

Jotashield Primer is a water-based primer that provides an excellent foundation for the Jotashield series. It seals off the surface to resist alkali and moisture, while promoting good adhesion between the topcoat and surface for a long-lasting coating. For more detailed product and colour information, please visit Jotashield Primer

Key features

  • Alkali-resistant
  • Superb adhesion
  • Water-resistant

Product Category :

  • Building – exterior
  • Exterior primers and preparation

Technology : –

Substrate : Cement plaster, Block work, Rendered surfaces

EPOXY HR – 150 -200 °C

Epoxy HR is a heat resistant coating suitable for temperatures up to 205 °C (401 °F) continuous. It is also suitable for cryogenic temperatures, down to -196 °C (-321 °F), can be used for both insulated and non-insulated substrates. Epoxy HR has very good water resistance, which gives it excellent corrosion protection properties. It significantly prolongs the lifetime of an asset, reducing the maintenance need and the risk of corrosion under insulation (CUI) – avoiding unnecessary and costly shutdowns. Epoxy HR is suitable for maintenance situations and can be applied on hot substrates up to 150 °C and St2 surface preparation. The product has proven its excellent performance over the last 20 years of successful applications globally.

Key features

  • Heat resistant up to 205 °C continuous
  • Suitable for maintenance
  • Can be applied on hot substrates up to 150 °C
  • Reduced risk of CUI
  • For both insulated and non-insulated surfaces
  • Accepts St2 surface preparation

Product Category :

  • Heat resistant coatings
  • Anticorrosive primers
  • New construction primers

Technology :  Epoxy

Substrate : Aluminium, Carbon steel, Galvanized steel, Stainless steel, Coated surfaces, Shop primed steel

SOLVALITT MIDTHERM UP TO 250 °C

Solvalitt Midtherm is a one component, physically drying silicone acrylic coating providing a durable aesthetic finish that is heat resistant up to 260 °C. Solvalitt Midtherm is compatible with all products in our heat resistant Jotatemp range. It is suitable for non-insulated surfaces and can be used as a primer, midcoat or finish coat in atmospheric environments. One component simplicity eases the application. Solvalitt Midtherm is available in 15 high-temperature stable colours with non-chalking properties. Additional colours may be tinted over MCI (restrictions may apply). Solvalitt Midtherm is also available in an aluminium variant – Solvalitt Midtherm Alu.

Key features

  • Durable finish for high-temperature areas
  • Heat resistant up to 260 °C
  • Available in 15 high-temperature stable colours
  • Compatible with all Jotatemp products

Product Category :

  • Heat resistant coatings
  • Topcoats
  • Industrial topcoats

Technology : Silicone acrylic

Substrate : Carbon steel, Galvanized steel, Stainless steel, Coated surfaces

SOLVALITT UP TO 400 – 600 °C

Solvalitt provides a durable aesthetic finish on assets exposed to elevated temperatures such as colours for markings on pipes and is heat resistant up to 600 °C. Solvalitt is a one component, physically drying silicone acrylic coating. Solvalitt is compatible with all products in our heat-resistant Jotatemp range and is suitable for non-insulated surfaces and can be used as primer, midcoat or finish coat in atmospheric environments. Solvalitt is available in 14 hightemperature stable colours with non-chalking properties. Additional colours may be tinted over MCI (restrictions may apply). Solvalitt is also available in an aluminum variant – Solvalitt Alu.

Key features

  • Durable finish for high temperature areas
  • Heat resistant up to 600 °C
  • Available in 14 high temperature stable colours
  • Compatible with all Jotatemp products

Product Category :

  • Heat resistant coatings
  • Topcoats
  • Industrial topcoats

Technology : Silicone acrylic

Substrate : Carbon steel, Galvanized steel, Stainless steel, Coated surfaces

JOTATEMP 250

Jotatemp 250 is a two-component glass flake reinforced epoxy composite coating resistant to temperatures up to 250 °C and low temperatures down to -196 °C. Jotatemp 250 can be used as a primer, midcoat or finish coat in atmospheric environments, and is suitable for insulated and non-insulated surfaces. The product is available in four colours. Jotatemp 250 offers excellent corrosion protection due to the barrier protection provided by the 15% glass flakes. The product is particularly suitable for use under insulation and helps prevent corrosion under insulation (CUI). Jotatemp 250 offers good corrosion protection at ambient conditions during construction and shut-down periods. Jotatemp 250 has the highest temperature resistance in the market for this type of technology and provides safety even during steam outs at temperatures above normal operating temperature – giving you operational flexibility. Jotatemp 250 can be applied on hot substrates up to 150 °C and on substrates prepared to St2.

Key features

  • Heat resistant coating to temperatures between -196 °C and 250 °C
  • Highest temperature resistance in the market for this technology
  • Safety even during steam out above normal operating temperature
  • Glass-flake reinforced for added barrier protection
  • Particularly suitable for use under insulation to help prevent CUI
  • For use on both insulated and non-insulated surfaces

Product Category :

  • Heat resistant coatings
  • Anticorrosive primers
  • New construction primers

Technology : Epoxy

Substrate : Aluminium, Carbon steel, Galvanized steel, Stainless steel, Coated surfaces, Shop primed steel

JOTATEMP 1000

Jotatemp 1000 is a heat resistant primer with the market’s widest operating temperature range. As an inert multipolymeric matrix coating, Jotatemp 1000 is resistant to temperatures as low as -196 °C and as high as 1000 °C continuously (where substrates allow). Jotatemp 1000 is suitable for insulated and non-insulated surfaces and can be used as a primer or a finish coat in atmospheric environments. It offers optimised corrosion protection of carbon steel at ambient temperatures during construction and shutdown periods. This coating offers excellent corrosion protection under insulation at operational temperatures exceeding 250 °C. Using Jotatemp 1000 can reduce the need for costly maintenance shutdowns as it can be applied on hot substrates up to 250 °C and accepts St2 surface preparation. It cures in ambient conditions, which improves the anti-corrosive properties and increases abrasion resistance, greatly reducing the need for on-site touch-ups. Jotatemp 1000 does not chalk under UV exposure since the binder formulation is based on inorganic chemistry. The coating passes standard tests for preventing corrosion under insulation. Jotatemp 1000 is optimised for carbon steel and ceramic substrates. For other substrates please contact your local TSS.

Key features

  • Resistant to temperatures from -196 °C to 1000 °C
  • Optimized performance on carbon steel and ceramic substrates
  • Can be applied on hot substrates up to 250 °C and accepts St2 surface preparation
  • For insulated and non-insulated substrates
  • Ambient temperature curing

Product Category :

  • Heat resistant coatings
  • Anticorrosive primers
  • New construction primers

Technology : Inert multipolymeric matrix

Substrate : Carbon steel, Ceramic substrates